How do I Change the Spoken Language on a Wi-Fi-connected robot?

To find the robot language settings on the new Roomba® HOME App, click the three dots on the top right to open Robot Settings, and click on about “robot language”.

You can only change a j-series robot’s spoken language through the app.

Only 600 & 800 wi-fi connected robots, and e-series robots allow you to manually change the robots spoken languages through physical button presses on the robot itself. 

Change Language Using the App:
To access the  “Robot Language” screen of the app, select Settings ➔ Robot Language. Choose either from your robot's Installed Languages or select from the Additional Languages.
If you cannot select Robot Language, it means that your mobile device is not on the same network as the robot, or it's not connected to the internet. Ensure that your mobile device is on the same network as the one that your robot is connected to.

Change Language Using the Robot:

1. Take Roomba® off of the Home Base® and turn Roomba® off by pressing CLEAN for about two (2) seconds.
2. Press and hold CLEAN until Roomba® turns on again (approximately 4 seconds) and says the current language.
3. Release CLEAN, Roomba® will now be in Language Selection mode.
4. Press CLEAN repeatedly until you hear the language you want.
5. Press and hold CLEAN to turn off the robot and confirm your language choice.

Note:

• Beginning with App Version 7.1, you will be able to choose a male speaking voice for your robot.